|
|
| Maxima 821 / 821T (TIPPING
module) |
|
Single-Feed
Plastic Card Embossers
| A unit designed for immediate
and decentralized issuance of small quantities of
plastic cards. |
| • Equipped with the SPA
system: Cards are inserted and removed from the
single access point for maximum operator
convenience. |
| • Convenient and easy to use.
|
| • Optional magnetic stripe
encoding |
| • Two available versions:
without (821) and with (821T) TIPPING module for
embossed characters. | |
|
| available options |
Infill device in front version (font OCR B1)
or in rear (font OCR A1 or MasterCard). LCD off line
editing. Auxiliary printer port. Chip contact
initializing. |
| built-in tipper unit |
Yes, in model 821T |
| communication interface |
Serial RS232 port. |
| dimensions and weight |
Model 821: 450 x 485 x 290 mm x 35 kg,
(17,75"x19"x11,50"x78 lbs). Model 821T: 585 x 485 x 290
mm x 42 kg, (23"x19"x11,50"x93 lbs) |
| drum capacity |
Drum capacity: 60/80/105 characters,
embossing and/or infill. |
| electrical requirements |
117 V / 60 Hz - 220 V / 50 Hz. |
| input hopper capacity |
Manual feed: SPA (Single Point Access
system). Pre-embossed card feed feature. |
| magnetic stripe encoding |
3 Tracks ISO 7811, LoCo-MeCo/HiCo. |
| performance |
One card in 15 seconds |
| reject |
Alarm notification. |
| software |
Windows based application software. Firmware:
self diagnostic, selectable automatic repeat card,
pre-encoded card reading with full post processing of
the same card, resettable and non resettable counters.
System status and diagnostic messages reported on
PC. |
|
| |
| | |
